Looking after you Groeneveld-Beka Twin autogreaser

If your machine has a Groeneveld-Beka Twin grease system fitted Congratulations! 

Whether it was fitted at the factory or in NZ This system along with some simple maintenance will extend the life of your machine and save countless hours on the end of a grease gun.

             

Grease

Select a Quality grease, Most common greases specified by the machine manufacturer will work well Distrilube  also stock and sell Groeneveld-Beka Greenlube Grease 

When we fit a system for you and you use the Genuine Greenlube grease this will extend your warranty to 3 Years 

 

Cleanliness at filling time   

Your Twin pump is a well sealed unit , Generally the only way for dust and dirt to get into the reservoir is through the filling process Here are some steps to prevent this. 

• Keep your grease container in a clean dry area with a well fitting lid 
• Keep the dust cap on your coupler when not filling 
• Ensure your coupler connections are clean before filling - Wipe the coupler with a clean rag then depress the ball in the center of coupler and wipe again with the clean rag 
• fill the pump to the fill line marked at the top of reservoir 
• Replace the coupler after filling                                                                       

 

Periodic checks 

Even though your machine now greases itself it is still important to have a look over it periodically. 

Your checks should include 

• No   broken or leaking lines or fittings 
• Grease visible on the pins 
• The reservoir has sufficient grease 
• The pump has no visible damage 
• A dust cap is fitted to the filler plug 

 

If you discover a broken line or suspect the system is not operating correctly give us a call and we can get it checked out for you.

0508 347874